WSO2 Identity Server supports 2-legged and 3-legged OAuth. To enable OAuth support for your client application, you need to register your application.
2-legged OAuth with OAuth 1.0 and 2.0¶
OAuth 1.0 emerged from the large social providers like Facebook, Yahoo!, AOL, and Google. Each had developed its own alternative to the password anti-pattern. OAuth 1.0 reflected their agreement on a single community standard. As a result of security upgrades, OAuth 1.0a was released as the revised specification that offered upgraded security to users. In 2009, recognizing the value of more formalized standardization, that community contributed OAuth 1.0 to the IETF. It was within the IETF Working Group that the original OAuth 1.0 was reworked and clarified to become the Informative RFC 5849.
After more standardization, in 2010, Microsoft, Yahoo!, and Google created the Web Resource Authentication Protocol (WRAP), which was soon submitted into the IETF WG as input for OAuth 2.0. WRAP proposed significant reworking of the OAuth 1.0a model. Among the changes were the deprecation of message signatures in favor of SSL, and a formal separation between the roles of ‘token issuance’ and ‘token reliance.’
Development of OAuth 2.0 in the IETF consequently reflects the input of both OAuth 1.0, OAuth 1.0a, and the WRAP proposal. The different assumptions about what are appropriate security protections between OAuth 1.0a and WRAP have created tensions within IETG OAuth WG.
While OAuth 2.0 initially reflected more of the WRAP input, lately there has been a swing in group consensus that the signatures of OAuth 1.0a that were deprecated by WRAP are appropriate and desirable in some situations. Consequently, signatures are to be added back as an optional security mechanism.
OAuth provides a method for clients to access server resources on behalf of a resource owner (such as a different client or an end-user). It also provides a process for end-users to authorize third-party access to their server resources without sharing their credentials (typically, a username and password pair), using user-agent redirections.
In the traditional client-server authentication model, the client requests for an access restricted resource (protected resource) on the server by authenticating it with the server using the resource owner's credentials. In order to provide third-party applications with access to restricted resources, the resource owner shares its credentials with the third-party. This creates several problems and limitations:
Third-party applications are required to store the resource owner's credentials for future use, typically a password in clear-text.
Servers are required to support password authentication, despite the security weaknesses created by passwords.
Third-party applications gain overly broad access to the resource owner's protected resources, leaving resource owners without any ability to restrict duration or access to a limited subset of resources.
Resource owners cannot revoke access to an individual third-party without revoking access to all third-parties, and must do so by changing their password.
Compromise of any third-party application results in compromise of the end-user's password and all of the data protected by that password.
The protocol centers on a three-legged scenario, delegating user access to a consumer for resources held by a Service Provider. In many cases, a two-legged scenario is needed, in which the consumer is acting on behalf of itself, without a direct or any user involvement.
OAuth was created to solve the problem of sharing two-legged credentials in three-legged situations. However, within the OAuth context, consumers might still need to communicate with the Service Provider using requests that are consumer-specific. Since the consumers already established a Consumer Key and Consumer Secret, there is value in being able to use them for requests where the consumer identity is being verified.
This specification defines how 2-legged OAuth works with OAuth 1.0. However it never became an IETF RFC.
With OAuth 1.0, 2-legged OAuth includes two parties, i.e., the consumer and the service provider. Basically in this case the consumer also becomes the resource owner. The consumer first needs to register a consumer_key and consumer_secret with the service provider. To access a Protected Resource, the consumer sends an HTTP(S) request to the Service Provider's resource endpoint URI. The request MUST be signed as defined in OAuth Core 1.0 section 9 with an empty Token Secret.
All the requests to the Protected Resources MUST be signed by the consumer and verified by the Service Provider. The purpose of signing requests is to prevent unauthorized parties from using the Consumer Key when making Protected Resources requests. The signature process encodes the Consumer Secret into a verifiable value which is included with the request.
OAuth does not mandate a particular signature method, as each implementation can have its own unique requirements. The protocol defines three signature methods: HMAC-SHA1, RSA-SHA1, and PLAINTEXT, but Service Providers are free to implement and document their own methods.
The consumer declares a signature method in the oauth_signature_method parameter, generates a signature, and stores it in the oauth_signature parameter. The Service Provider verifies the signature as specified in each method. When verifying a consumer signature, the Service Provider SHOULD check the request to ensure it has not been used in a previous consumer request.
The signature process MUST NOT change the request parameter names or values, with the exception of the oauth_signature parameter.
In 2-legged OAuth with OAuth 1.0, the request to the protected resource looks like the following:
http://provider.example.net/profile Authorization: OAuth realm="http://provider.example.net/", oauth_consumer_key="dpf43f3p2l4k3l03", oauth_signature_method="HMAC-SHA1", oauth_signature="IxyYZfG2BaKh8JyEGuHCOin%2F4bA%3D", oauth_timestamp="1191242096", oauth_token="", oauth_nonce="kllo9940pd9333jh", oauth_version="1.0"
This specification defines OAuth2. OAuth 2.0 defines four roles:
- Resource owner : An entity capable of granting access to a protected resource (e.g. end-user).
- Resource server : The server hosting the protected resources, capable of accepting and responding to protected resource requests using access tokens.
- Client : An application making protected resource requests on behalf of the resource owner and with its authorization.
- Authorization server : The server issuing access tokens to the client after successfully authenticating the resource owner and obtaining authorization.
In case of 2-legged OAuth, the client becomes the resource owner.
At a very high-level, it is possible to break the full OAuth flow into two parts.
- Get a token from the authorization server.
- Use the token to access the resource server.
OAuth 2.0 defines a concept called " authorization grant " which is a credential representing the resource owner's authorization (to access its protected resources) used by the client to obtain an access token. This specification defines the following four grant types:
- Authorization code
- Resource owner password credentials
- Client credentials
More information about the grant types can found from here.
Client Credentials is the grant type which goes closely with 2-legged OAuth. With the Client Credentials grant type, the client can request an access token using only its client credentials (or other supported means of authentication) when the client is requesting access to the protected resources under its control. Once the client makes this request to the authorization server - it will return back an access token to access the protected resource. The access token returned back to the client could be either of type bearer of MAC. The "mac" token type defined in ietf-oauth-v2-http-mac is utilized by issuing a MAC key together with the access token which is used to sign certain components of the HTTP requests by the client when accessing the protected resource. The MAC scheme requires the establishment of a shared symmetric key between the client and the server. This is often accomplished through a manual process such as client registration.
The OAuth 2.0 specification offers two methods for issuing a set of MAC credentials to the client using the following:
- OAuth 2.0 in the form of a MAC-type access token, using any supported OAuth grant type.
- The HTTP "Set-Cookie" response header field via an extension attribute.
When using MAC type access tokens with 2-legged OAuth, the request to the protected resource looks like the following:
GET /resource/1?b=1&a=2 HTTP/1.1 Host: example.com Authorization: MAC id="h480djs93hd8", nonce="264095:dj83hs9s", mac="SLDJd4mg43cjQfElUs3Qub4L6xE="
Bearer type is defined here. It is a security token with the property that any party in possession of the token (a "bearer") can use the token in any way that any other party in possession of it can. Using a bearer token does not require a bearer to prove possession of cryptographic key material (proof-of-possession).
When using Bearer type access tokens with 2-legged OAuth, the request to the protected resource looks like the following.
GET /resource HTTP/1.1 Host: server.example.com Authorization: Bearer vF9dft4qmT
Also - the issued access token from the Authorization Server to the client, has an 'scope' attribute.
2-legged OAuth with OAuth 1.0 does not have this scope attribute as well as access token concept - so the resource server has to perform authorization separately based on the resource the client is going to access.
The client should request access tokens with the minimal scope and lifetime necessary. The authorization server takes the client identity into account when choosing how to honor the requested scope and lifetime, and may issue an access token with less rights than requested.
When securing APIs with OAuth - this 'scope' attribute can be bound to different APIs. So the authorization server can decide whether to let the client access this API or not.
Click here for information about Nonce and Timestamp
OAuth nonce and timestamp together play an important role when it comes to OAuth Security depending on how they are being implemented in an application. These two help OAuth to be protected from what is called a replay-attack - an attack where the same request is resend, maybe over and over again.
The term nonce means ‘number used once’. It should be a unique and random string that is meant to uniquely identify each signed request. This string value is used to associate a Client session with an ID Token, and to mitigate replay attacks. In OAuth, the nonce value should be sent by the client during implicit flow. Then the value is passed through unmodified from the Authentication Request to ID token
By having a unique identifier for each request, the Service Provider is able to prevent requests from being used more than once. When implementing this, the Consumer/Client generates a unique string for each request sent to the Service Provider. Service Provider keeps track of all the nonces used to prevent them from being used a second time. Since the nonce value is included in the signature, it cannot be changed by an attacker without knowing the shared secret.
It becomes a problem when Service Provider keeps a persistent storage of all nonce values received. To make this practical, timestamp comes to play. OAuth adds a timestamp value to each request which allows the Service Provider to keep nonce values only for a limited time. When a request comes in with a timestamp that is older than the retained time frame, it is rejected as the Service Provider no longer has nonces from that time period. It is safe to assume that a request sent after the allowed time limit is a replay attack. The nonce together with timestamp, provides a perpetual unique value that can never be used again by an attacker.