Skip to content

Retrieving Tenant Resources Based on Search Parameters

This section guides you through using the /search endpoint of the Configuration Management REST API to search for tenant resources.

/search endpoint

The /search endpoint of the Configuration Management REST API allows you to perform cross-tenant search for resources .

The search context URL should be as follows:

https://{host}:{port}/t/{tenant-domain}/api/identity/config-mgt/v1.0/search?$filter={search-query}

Here, the value of {search-query} should be in the form of a configuration management search query. For information on how to write a search condition that is in the form of a configuration management search query, see Writing a configuration management search query.

Writing a configuration management search query

Configuration management search query is a Open Data Protocol based search query supported via Apache CXF.

The configuration management search query is a search condition that is built using primitive configuration management search conditions in the form of a string. The following topics describe the configuration management search conditions that you can use to write a configuration management search query.

Configuration management primitive search condition

A primitive search condition is a string in the following form:
{RESOURCE_SEARCH_PARAMETER} {PRIMITIVE_CONDITION_OPERATOR} '{VALUE}'

Following are the parameters of a resource supported in a primitive search condition and the corresponding values to replace the {RESOURCE_SEARCH_PARAMETER} place holder :

Resource parameter Value to replace {RESOURCE_SEARCH_PARAMETER}
Tenant domain tenantDomain
ID value of the resource type resourceTypeId
Name of the resource type resourceTypeName
ID value of the resource resourceId
Name of the resource resourceName
A key of the attribute attributeKey
Value of the attribute attributeValue

Following are the operators supported in a primitive condition and the corresponding values to replace the {PRIMITIVE_CONDITION_OPERATOR} place holder :

Primitive condition operator Value to replace {PRIMITIVE_CONDITION_OPERATOR}
Equal eq
Not equal ne
Less than lt
Less or equal le
Greater than gt
Greater or equal ge

Configuration management complex search condition

A complex search condition is generally built by combining primitive search conditions. The simplest form of a complex search condition string is as follows:

{PRIMITIVE_SEARCH_CONDITION_1} {COMPLEX_CONDITION_OPERATOR} {PRIMITIVE_SEARCH_CONDITION_2}

Two complex search condition created as mentioned above can also be joined as follows to form another complex search condition:

{COMPLEX_SEARCH_CONDITION_1} {COMPLEX_CONDITION_OPERATOR} {COMPLEX_SEARCH_CONDITION_2}

Note

For better readability, it is recommended to use parentheses to group complex search conditions when you join conditions using a COMPLEX_CONDITION_OPERATOR .

Following are the operators supported to build a complex search condition and the corresponding values to replace the {COMPLEX_CONDITION_OPERATOR} place holder :

Complex condition operator Value to replace {COMPLEX_CONDITION_OPERATOR}
AND and
OR or

Info

When you join complex search conditions together with complex condition operators, the result is always another complex condition. Therefore, any required search condition can be built as a configuration management complex search condition in this manner.

Search scenarios

This section demonstrates the different ways of searching for resources (i.e. different search scenarios). In the scenarios given below, an HTTP GET request is sent to the following location with the {search-query} placeholder value replaced accordingly and encoded for a URL. When you are trying out these scenarios, fill the {host}, {port} and the {tenant-domain} with the relevant values.

Reference

Sample GET request for the super tenant

Sample CURL command for a tenant

Assume you have the following resources in your database.

Name Resource JSON
resource_1
resource_2
resource_3
resource_4

There are two approaches to search or filter the resources in your database:

  • Meta-data based search
  • Attribute-based search

Use the following meta-data parameters to search for resources.

Search Parameter of the Resource {RESOURCE_SEARCH_PARAMETER}
Tenant domain tenantDomain
ID value of the Resource Type resourceTypeId
Name of the Resource Type resourceTypeName
ID value of the Resource resourceId
Name of the Resource resourceName

Search for resources in a specific tenant domain

The table below shows a sample search query that is used to search for resources that are created in the super tenant domain.

{search-query}

Response JSON

tenantDomain eq 'carbon.super'

click to see the sample response

{
"resources": [
        {
            "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_2",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:59",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "aea8665f-d6d7-4ec3-9449-b6423ed9fddf"
                },
                {
                    "key": "to",
                    "value": "wso2.com",
                    "attributeId": "22f4f25a-3f79-4db3-b805-e53946110fa8"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        },
        {
            "resourceId": "aa70ca2e-bd52-4a97-97b6-a3cd3f261a8a",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_4",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 06:08:30",
            "files": [],
            "attributes": [
                {
                    "key": "server",
                    "value": "smtp.com",
                    "attributeId": "f4cd7255-a011-4bbb-ae3c-bbb3f860f553"
                },
                {
                    "key": "to",
                    "value": "wso2.com",
                    "attributeId": "de0b80e0-66c0-4168-b884-184c38cd6301"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        },
        {
            "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_1",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:48",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
                },
                {
                    "key": "to",
                    "value": "123.com",
                    "attributeId": "3633269a-cab9-4e14-a264-dddb1a6001ed"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        },
        {
            "resourceId": "7982a6e0-512a-4ebe-8c14-16f1819967c9",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_3",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:26:47",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "xyz.com",
                    "attributeId": "589f8423-bf57-4906-bf34-2d821358ed13"
                },
                {
                    "key": "to",
                    "value": "wso2.com",
                    "attributeId": "ffe5acee-d59f-4918-9bfb-85c282490691"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        }
    ]
}


Search for resources in a specific tenant domain using the resource name

The table below shows a sample search query that is used to search for resources named "resource_1" and "resource_2" in the super tenant domain using the resource name.

{search-query}

Response JSON

(tenantDomain eq 'carbon.super') and  ((resourceName eq 'resource_1') or (resourceName eq 'resource_2'))

Click to see the sample response...

{
    "resources": [
        {
            "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_2",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:59",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "aea8665f-d6d7-4ec3-9449-b6423ed9fddf"
                },
                {
                    "key": "to",
                    "value": "wso2.com",
                    "attributeId": "22f4f25a-3f79-4db3-b805-e53946110fa8"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        },
        {
            "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_1",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:48",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
                },
                {
                    "key": "to",
                    "value": "123.com",
                    "attributeId": "3633269a-cab9-4e14-a264-dddb1a6001ed"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        }
    ]
}

There are two parameters in any attribute; a key, and a value. The search queries given below are used to search for a resource using a combination of its attribute parameters.

Note

The configuration management search query does not support a resource search parameter that has multiple primitive search conditions joined by the complex operator ‘and’. For more information, see the section below

Search for resources using an attribute key, value pair

The table below shows a sample search query used to search for a resource with an attribute, where the key is equal to "from" and the value is equal to "abc.com".

{search-query}

Response JSON

(attributeKey eq 'from') and (attributeValue eq ' abc.com ')

Click to see the sample response...

{
    "resources": [
        {
            "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_2",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:59",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "aea8665f-d6d7-4ec3-9449-b6423ed9fddf"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        },
        {
            "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_1",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:48",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        }
    ]
}

Note

Although both resource_1 and resource_2 have another attribute where the key is equal to "to", the returned search response only contains the requested attribute "from". To retrieve all available attributes for a resource using search, you need to search for the resource using the resource ID as given below. For example, to retrieve resource_1 using the resource ID, use the following search query:

Click to see the search query

{search-query} Response JSON
resourceId eq 'c9b8913f-3ae4-43f5-9552-a8676fd19646'
Click to see the sample response...

            {
    "resources": [
        {
            "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
            "tenantDomain": "carbon.super",
            "resourceName": "resource_1",
            "resourceType": "e-mail",
            "lastModified": "2019-01-14 03:16:48",
            "files": [],
            "attributes": [
                {
                    "key": "from",
                    "value": "abc.com",
                    "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
                },
                {
                    "key": "to",
                    "value": "123.com",
                    "attributeId": "3633269a-cab9-4e14-a264-dddb1a6001ed"
                }
            ],
            "hasFile": false,
            "hasAttribute": false
        }
    ]
}

Search for resources using an attribute key

The table below shows a sample search query used to search for a resource with an attribute where the key is equal to "from". In this case, the value for the attribute can be any value.

{search-query}

Response JSON

attributeKey eq 'from'

Click to see the sample response

{
"resources": [
    {
        "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
        "tenantDomain": "carbon.super",
        "resourceName": "resource_2",
        "resourceType": "e-mail",
        "lastModified": "2019-01-14 03:16:59",
        "files": [],
        "attributes": [
            {
                "key": "from",
                "value": "abc.com",
                "attributeId": "aea8665f-d6d7-4ec3-9449-b6423ed9fddf"
            }
        ],
        "hasFile": false,
        "hasAttribute": false
    },
    {
        "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
        "tenantDomain": "carbon.super",
        "resourceName": "resource_1",
        "resourceType": "e-mail",
        "lastModified": "2019-01-14 03:16:48",
        "files": [],
        "attributes": [
            {
                "key": "from",
                "value": "abc.com",
                "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
            }
        ],
        "hasFile": false,
        "hasAttribute": false
    },
    {
        "resourceId": "7982a6e0-512a-4ebe-8c14-16f1819967c9",
        "tenantDomain": "carbon.super",
        "resourceName": "resource_3",
        "resourceType": "e-mail",
        "lastModified": "2019-01-14 03:26:47",
        "files": [],
        "attributes": [
            {
                "key": "from",
                "value": "xyz.com",
                "attributeId": "589f8423-bf57-4906-bf34-2d821358ed13"
            }
        ],
        "hasFile": false,
        "hasAttribute": false
    }
    ]
}

Search for resources with multiple attributes using the keys

The table below shows a sample search query for a resource that satisfies the following conditions:

  • Has an Attribute where the key is equal to “from”.

  • Has an Attribute where the key is equal to “to”.

Note

Building the configuration management search query for this scenario will create the following search query: attributeKey eq 'from' and attributeKey eq 'to'.

However, the Search API does not allow multiple search conditions joined by the 'and' complex operator for the same Resource search parameter. Therefore, this requirement cannot be achieved using a single search and has to be done in two steps. See the instructions given below for sample search queries.

  1. Retrieve all the resources with an attribute where the key is equal to "from".

    {search-query}

    Response JSON

    attributeKey eq

    'from''

    Click to see the sample response...

    {
        "resources": [
            {
                "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_2",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:16:59",
                "files": [],
                "attributes": [
                    {
                        "key": "from",
                        "value": "abc.com",
                        "attributeId": "aea8665f-d6d7-4ec3-9449-b6423ed9fddf"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            },
            {
                "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_1",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:16:48",
                "files": [],
                "attributes": [
                    {
                        "key": "from",
                        "value": "abc.com",
                        "attributeId": "28092ab2-594f-421f-8c7e-9e8d4fbe1a5c"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            },
            {
                "resourceId": "7982a6e0-512a-4ebe-8c14-16f1819967c9",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_3",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:26:47",
                "files": [],
                "attributes": [
                    {
                        "key": "from",
                        "value": "xyz.com",
                        "attributeId": "589f8423-bf57-4906-bf34-2d821358ed13"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            }
        ]
    }

  2. Search within the results received above for resources with an attribute where the key is equal to "to". This will retrieve search results that satisfies both conditions (i.e. resources with an attribute where the key is equal to "from" and an attribute where the key is equal to "to").

    {search-query}

    Response JSON

    attributeKey eq 'to' and (resourceId eq '29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba' or resourceId eq 'c9b8913f-3ae4-43f5-9552-a8676fd19646' or resourceId eq '7982a6e0-512a-4ebe-8c14-16f1819967c9')


    Click to see the sample response...

                    {
        "resources": [
            {
                "resourceId": "29bd5f2d-54b4-4169-8cac-aa2e9cf5c1ba",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_2",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:16:59",
                "files": [],
                "attributes": [
                    {
                        "key": "to",
                        "value": "wso2.com",
                        "attributeId": "22f4f25a-3f79-4db3-b805-e53946110fa8"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            },
            {
                "resourceId": "c9b8913f-3ae4-43f5-9552-a8676fd19646",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_1",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:16:48",
                "files": [],
                "attributes": [
                    {
                        "key": "to",
                        "value": "123.com",
                        "attributeId": "3633269a-cab9-4e14-a264-dddb1a6001ed"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            },
            {
                "resourceId": "7982a6e0-512a-4ebe-8c14-16f1819967c9",
                "tenantDomain": "carbon.super",
                "resourceName": "resource_3",
                "resourceType": "e-mail",
                "lastModified": "2019-01-14 03:26:47",
                "files": [],
                "attributes": [
                    {
                        "key": "to",
                        "value": "wso2.com",
                        "attributeId": "ffe5acee-d59f-4918-9bfb-85c282490691"
                    }
                ],
                "hasFile": false,
                "hasAttribute": false
            }
        ]
    }


Top